Computerized Universal Testing Machines |
| |
UTK - 40E(PC) |
| SALIENT FEATURES |
 |
Windows Based Click and Go Software Package. |
|
Supports Tensile, Compression, Bending and many more Tests. |
|
Confirms BIS 1825 - 1991 and ISO - 7500 - 1986 |
|
Standard / Customer defined reports |
|
Compensated for main screw clearances and frame stiffness. |
|
Extensive Database support. |
|
|
| |
| GENERAL FEATURES OF COMPUTERISED UNIVERSAL TESTING M/CS. |
| Universal testing machines of UTK-*** E(PC) series consist of : |
| 1. |
Hydraulic Loading Unit |
| 2. |
Hydraulic Control Console |
| 3. |
Electronic Hardware Interface |
| 4. |
Highspeed A/D Converter. |
| 5. |
Windows Based Software for Displaying and Analyzing
Test Results. |
| 6. |
Unlimited Data Base Support (Limited by PC Hard Disk Capacity) |
| 7. |
Configured for Variety of Tests like,Tensile,Compression Transverse,shear etc. |
| 8. |
Can be upgraded without any major Hardware change |
|
|
| HYDRAULIC LOADING UNIT |
| Hydraulic Loading Unit of Universal testing machines of UTK-*** E(PC) series consist of : |
| |
| 1. |
Hydraulic Power Pack to develop adequate Hydraulic Pressure to be applied on the specimen under test. |
| 2. |
Flow Control Valves to smoothly control the rate of loading. |
| 3. |
Machine Table which moves Up and down with hydraulic ram |
| 4. |
Chain and sprocket mechanism with geared motor to control movement of middle crosshead |
| 5. |
Upper Crosshead connected to machine table through plane columns. |
| 6. |
Main screws for adjusting and controlling position of middle crosshead. |
|
| |
|
Digital - Universal Testing Machines |
| |
|
| SALIENT FEATURES |
|
Easy data feeding through Sealed Membrane type Keyboard. |
|
Suports Tensile, Compression, Bending and many more Tests |
|
Confirms BIS 1825-1991 and ISO -7500--1986 |
|
Extensive Graphic and reports Printing. |
|
|
| |
| GENERAL FEATURES OF DIGITAL UNIVERSAL TESTING M/CS. |
| Universal testing machines of UTK-*** E series consist of : |
| 1. |
Hydraulic Loading Unit |
| 2. |
Hydraulic Control Console |
| 3. |
Electronic Hardware Interface. |
| 4. |
Configured for Variety of Tests like,Tensile,Compression Transverse,shear etc. |
| 5. |
Variety of Graphs and Report printing. |
| 6. |
Can be upgraded without any major Hardware change |
|
| |
| HYDRAULIC LOADING UNIT |
| Hydraulic Loading Unit of Universal testing machines of UTK-*** E series consist of : |
| 1. |
Hydraulic Power Pack to develop adequate Hydraulic Pressure to be applied on the specimen under test. |
| 2. |
Flow Control Valves to smoothly control the rate of loading. |
| 3. |
Machine Table which moves Up and down with hydraulic ram |
| 4. |
Chain and sprocket mechanism with geared motor to control movement of middle crosshead |
| 5. |
Upper Crosshead connected to machine table through plane columns. |
| 6. |
Main screws for adjusting and controlling position of middle crosshead. |
| |
|
|
| |
| MEASURING UNIT: |
| 1. |
Ultra stable precision grade pressure transducer |
| 2. |
Encoder for displacement measurement |
| 3. |
Electronic hardware for Interfacing measuring system for with Digital display for load and displacement. |
| 4. |
Built in RS 232 port for PC Interface |
| 5. |
Built in parallel port for Dot - Matrix printer. |
| 6. |
Can be upgraded without major hardware charge. |
|
|
Mechanical Type Universal testing
Machines |
| |
|
| Salient Features |
|
Most simple and Easy to use. |
|
Suports Tensile, Compression, Bending and many more Tests |
|
Confirms BIS 1825-1991 and ISO -7500--1986 |
|
Built-in Graphic Recorder |
|
Auto Load Selector |
|
|
| |
| GENERAL FEATURES OF HYDROMECHANICAL UNIVERSAL TESTING M/CS. |
| Universal testing machines of UTK-*** Series consist of : |
| 1. |
Hydraulic Loading Unit |
| 2. |
Hydraulic Control Console |
| 3. |
Large Dial type Load Indicator with Dual Pointer. |
| 4. |
Equipped with Auto Load Selector. |
| 5. |
Equipped with Graphic Recording Attachment. |
| 6. |
Very simple to operate. |
|
| |
| HYDRAULIC LOADING UNIT: |
| Hydraulic Loading Unit Universal testing machines of UTK-*** Series consist of : |
| 1. |
Hydraulic Power Pack to develop adequate Hydraulic Pressure to be applied on the specimen under test. |
| 2. |
Flow Control Valves to smoothly control the rate of loading. |
| 3. |
Machine Table which moves Up and down with hydraulic ram |
| 4. |
Chain and sprocket mechanism with geared motor to control movement of middle crosshead |
| 5. |
Upper Crosshead connected to machine table through plane columns. |
| 6. |
Main screws for adjusting and controlling position of middle crosshead. |
|
| |
| MEASURING UNIT: |
| |
| 1. |
Hydraulic Power Pack to develop adequate Hydraulic Pressure to be applied on the specimen under test. |
| 2. |
Flow Control Valves to smoothly control the rate of loading. |
| 3. |
Electrical controls for Hydraulic motor and Crosshead motor. |
| 4. |
Large circular Dial with pair of needle Pointers for Load display. Red dummy pointer giving Fmax.load value |
| 5. |
Autograph assembly to draw an “On-Line” graph for Load Vs.Displacement. |
|
|
Technical Specs for Universal Testing
Machine |
Model |
UNITS |
UTK-10 |
UTK-10E |
UTK-20 |
UTK-20E |
UTK-40 |
UTK-40E |
UTK-60 |
UTK-60E |
UTK-100 |
UTK-100E |
| Max capacity |
kN |
100 |
200 |
400 |
600 |
1000 |
| 1st Measuring Range Resolution |
kN |
0-100
0.20 |
5 N upto
20 kN
25N above 20 kN |
0-200
0.40 |
10N upto
40 kN
50N above 40kN |
0-400
1.00 |
.02kN upto 80kN
0.1kN above 80 kN |
0-600
1.00 |
.03kN upto 120kN
0.15kN above 120kN
|
0-1000
2.00 |
.05kN upto 200kN
0.25kN
above 200kN |
| 2nd Measuring Range Resolution |
kN |
0-50
0.10 |
0-100
0.20 |
0-200
0.50 |
0-300
0.50 |
0-500
1.00 |
| 3rd Measuring Resolution |
kN |
0-25
0.05 |
0-50
0.10 |
0-100
0.25 |
0-120
0.20 |
0-250
0.50 |
| 4th Measuring Range Resolution |
kN |
0-10
0.02 |
0-20
0.04 |
0-40
0.10 |
0-60
0.10 |
0-100
0.20 |
| Max Clearance for Tensile Test |
mm |
50 - 700 |
50 - 700 |
50 - 700 |
50 - 800 |
50 - 850 |
| Max. Clearnace for Compression Test |
mm |
0 - 700 |
0 - 700 |
0 - 700 |
0 - 800 |
0 - 850 |
| Clearance between columns |
mm |
500 |
500 |
500 |
600 |
750 |
| Ram Stroke |
mm |
100 |
200 |
200 |
250 |
250 |
| Straining/piston speed at load |
mm/min |
0 - 300 |
0 - 150 |
0 - 150 |
0 - 100 |
0 - 80 |
| Electric Supply |
kW |
1.0 |
1.0 |
1.75 |
1.9 |
2.6 |
| |
3 ph. 440 volts 50 Hz |
Dimension
(mm approx) |
L
W
H |
2030
750
1960 |
2030
750
1960 |
2060
750
2180 |
2270
750
2540 |
2420
820
2900 |
| Weight(approx.) |
kg. |
1500 |
1500 |
2500 |
3500 |
5500 |
|
STANDARD ACCESSORIES : |
| For Tension Test: Clamping jaws for round specimens dia. |
mm |
10 - 20
20 - 30 |
10 - 20
20 - 30 |
10 - 25
25 - 40 |
10 - 25
25 - 40
40 - 55 |
10 - 25
25 - 45
45 - 70 |
Clamping
jaws for flat specimens |
Thickness |
mm |
0-10
10 -20 |
0-10
10 -2 0 |
0 - 15
15 - 30 |
0 - 15
15 - 30 |
0-22
22-44
44-65 |
| Width |
mm |
50 |
50 |
65 |
70 |
70 |
For compression
Test : pair of compression plates of diameter |
mm |
120 |
120 |
120 |
120 |
160 |
For Transverse
Test: Table with the adjustable rollers |
|
|
|
|
|
|
| Width of rollers |
mm |
160 |
160 |
160 |
160 |
160 |
| Diameter of rollers |
mm |
30 |
30 |
30 |
50 |
50 |
| Max. clearance bewtween supports |
mm |
500 |
500 |
500 |
600 |
800 |
| Radius of punch tops |
mm |
6,12 |
6,12 |
12,16 |
16,22 |
16,22 |
|
| Due to continuous efforts to improve the performance, technical specifications mentioned may change without prior notice. |
| |
|
RETEROFITTING AND MODERNISATION
|
M/s.Krystal Elmec can undertake Modernization and/or Retrofitting of any BRANDED Universal testing M/c.
It includes:
|
| Installing suitable transducers in Loading/Measuring system for sensing, Elongation/Displacement. |
| Installing suitable Interfacing Hardware like Preamplifiers,A/D converters etc. |
| Installing Digital Display in case conversion is in Digital Type M/c. |
| Installing relevant software on PC in case conversion is in PC based System. |
| Calibrating the M/c after modification |
|
| |
|
|
| |
1800C Bend Test Fixture. |
Mechanical Extensometer |
|
|
|
Pull out Test Fixture |
Brinell Test - Attachment |
|
|
| |
|
Electronic Extensometer |
Grips and Inserts
|
|
|
| |
|
|
| |
|
Computerised Brinell Testing Instrument |
|
|
|
| |
|
